Top 10 typical forklift accidents ， forklift procedure should take notice of these matters ！.
Top 10 typical forklift accidents ， forklift procedure should take notice of these matters ！.
Blog Article
Do not ignore the forklift at the workplace. If the operation is bad, there will be serious mishaps in mins, and there are lots of mishaps involving forklifts.
Situation 1: The forklift cargo blocked the chauffeur's sight, and the person ahead can not be discovered, causing a moving crash.
Instance 2: In order to maintain the balance of the forklift when lifting hefty goods, the staff members utilized their body weight as the counterweight, which virtually triggered casualties.
Case 3: The width of the forklift freight goes beyond the allowable width of the route and hangs on the roadside shelf, which nearly causes an accident.
Case 4: Forklift is speeding and surrender during a turn.
Situation 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the workers unlawfully, the forklift motorist does not wear the seat belt, the forklift lifter falls and the driver is crushed when the forklift rolls over.
Instance 7: The forklift driver did not put on a safety belt and fell from the vehicle when it surrendered and was crushed.
Forklift operation ought to take notice of these issues ：.
Begin.
1. Prior to starting, observe the surroundings, and after validating that there are no challenges that hinder the safety of driving, beep the horn first and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) scale should be secure before beginning.
3. When the forklift starts with a tons, the driver must first validate that the lots is secure and trustworthy.
4. The beginning must be sluggish and steady.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast ought to be tilted backwards. .
2. Do not lift the fork too expensive when driving. When going into and leaving the work website or while driving, beware that there will certainly be no obstacles overhead. When the load is taking a trip, the fork must not be elevated too expensive, which will influence the stability of the forklift. .
3. After unloading, the fork must be lowered to the regular driving position before driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal must be released initially. High-speed sharp turns are forbidden. High-speed doglegs will certainly cause the car to lose side security and topple. .
5. When the forklift is downhill, it is purely forbidden to switch off the fire and slide, and it is forbidden to brake suddenly while driving with tons unless there are unique conditions.
6. When the forklift is running, it should obey the website traffic rules in the factory and have to keep a certain security range from the vehicle ahead. .
7. When the forklift is running, the load should be in the lowest setting that does not impede the driving, and the gantry must be appropriately slanted back. The tons will not be increased except when stacking or loading. .
8. The height of the load must not obstruct the motorist's view. In unique scenarios, when the product impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The risk-free driving speed of the forklift in the manufacturing facility area is 5 km/h, and it must drive securely at a reduced speed when getting in the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to depend on the fork to hold items and play a stabilizing duty. .
12. If problems are located, they will certainly be repaired and reported in a timely fashion, and they will certainly never run with diseases or conceal them.
loading and dumping.
1. When fork-loading products, the distance between both forks need to be changed as needed to make the lots of both forks balanced and not skewed, and one side of the thing must protest the rack. .
2. It is forbidden to work with a single fork or make use of a fork top or pull. In special circumstances, safety and security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of packing and dumping items, the forklift must be stopped with the brake. .
4. The rate of the lorry must be slow and consistent. Beware not to roll the wheels on the dunnage, so as not Stand-on Electric Pallet Stacker to stretch the rolled things and hurt people. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the load, and it must be kept in mind that the fork tip should not touch other items or objects. The tons needs to be stabilized with very little back tilt of the gantry so that the tons does not glide backwards. The pole can be slanted forward somewhat when the load is decreased to allow for very easy positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at high speed and ram tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so as to prevent the collapse of the goods and harm people. .
8. Straining is prohibited, and it is forbidden to make use of forks to lift personnel to participate in high-altitude Electric Forklift Truck for Warehouse operations to stay clear of high-altitude falling mishaps. .
9. It is not permitted to use the brake inertia to slide, place, round or roll objects. .
10. It is not enabled to use forks to pick, transform pallet dump.
Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Before leaving the forklift, you need to unload the goods or lower the fork structure.
2. Draw the parking brake handle to dead or depress the hand brake button.
3. The engine is shut off and the power is removed. (Except for special circumstances, such as the vehicle driver does not leave the automobile's line of vision and does not exceed 1 minute).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look should be checked, and fuel, lubing oil and air conditioning water must be added.
2. Inspect the safety efficiency of starting, running and stopping.
3. Inspect whether the lights and horn signals are full and reliable.
4. During the operation of the forklift, examine whether the stress and temperature level are normal.
5. After the forklift is running, the outside leak needs to additionally be checked and the seals should be changed in time.
Forklift Safety Operation Specifications.
1. You should check prior to leaving the cars and truck;.
2. When you run into a person in front of you during driving, you need to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be also sharp to prevent the tendency of " totally free switching";.
6. Running up and down the slope must be slow-moving and consistent, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift employees carry the goods and progress, if they come across huge or heavy goods and go to the driver's line of sight, they should take the reversing exercise
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not allowed.
2. It is not permitted to raise the goods for long distance driving.
3. It is not allowed to pick up the goods by turning over the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not enabled to utilize inertia pressure to get the goods.
6. It is not enabled to make use of stopping pressure to exile round or easy-to-roll things.
7. It is not allowed to bring individuals to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Car park is not allowed under the list below conditions.
1. Contours, narrow roadways, train crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the section with the exact same size as the barrier should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844